TUMAKER Printers with Two Independent Print Heads Are Here. Up to 6 Possible Combinations

Just when it seemed that dual-material 3D printing had reached its limit, TUMAKER arrives to take it to the next level.

Dual-material 3D printing has been present in the 3D printing world for some time. Until now, the most widely used dual-material printing system has been one that uses two print heads within a single fixed structure. Although this method represented a major advancement when it first entered the market, it comes with several drawbacks: calibration problems, poor final part quality, material mixing, blockages during printing…

With the arrival of 3D printing with two independent print heads, dual printing within a single fixed structure is becoming less relevant. The introduction of 3D printers with two independent print heads has transformed the industry. Following this advancement, TUMAKER has gone even further. TUMAKER’s Pro Dual system eliminates the limitations mentioned above and expands 3D printing possibilities to levels never seen before.

The TUMAKER range of 3D printers is the only one in the world that allows users to operate with two independent print heads chosen by the customer. The opportunity to combine the printer’s two print heads depending on its intended use marks a turning point in 3D printing.

So, to take a closer look at this new launch and its impact on the 3D printing world, we will highlight some important aspects.

Advantages of Two Independent Print Heads

3D printing enthusiasts have long been asking for the introduction of a 3D printing system with two independent and combinable print heads.

TUMAKER offers different fully machined professional print heads that do not incorporate printed components. This guarantees the reliability associated with the brand.

Customers choose the two print heads for their printer, which can move freely along the X-axis. The wide variety of combinations offered by TUMAKER makes it possible to meet the specific expectations of anyone interested in the sector.

Two independent print heads provide considerable advantages:

• Separation of materials. By not combining different materials within the same print head, they are not affected by temperatures that differ from their ideal operating conditions. This means that each material is handled in its optimal state within its respective extruder. The properties of each material are maintained and printing errors are avoided. In addition, this system eliminates the problem of residues from one material falling onto the print made with the other material.

• Increased productivity. It is important to highlight that the print heads in the TUMAKER Pro Dual range operate independently. This increases productivity, as two parts can be printed at the same time using two print heads specifically selected for the task. With mirror production, printing time is reduced because both print heads operate independently.

• Elimination of double blockages in the 3D printer caused by one of the two materials.

• Continuous and stable printing. Printers equipped with this technology feature a calibration system that enables bed mapping. This characteristic, inherent to the TUMAKER range, ensures that printing always achieves the best results without manual intervention.

Variety of Print Heads (Bowden, Direct Drive and Pellets)

With the aim of meeting its customers’ needs, TUMAKER is always looking to innovate and develop specific solutions.

One distinguishing feature of its printers is the possibility of working with different print heads depending on the customer’s intended application.

There are three print head models which, as we will explain below, can be freely combined. In addition to Bowden and Direct Drive print heads, there is the exclusive Pellet 3D printing technology. This latest printing method has arrived to transform established practices in the industry and the materials used.

• Bowden Print Head: Ideal for achieving high print quality with rigid materials. Its feeding system allows the use of large-format spools weighing up to 10 kg. This print head facilitates production with hard and resistant materials.

• Direct Drive Print Head: The direct extrusion provided by this type of print head facilitates 3D printing with flexible materials.

• Pellet Print Head: As is well known, Pellet technology represents a revolution in 3D printing. The Pellet print head makes it possible to print with self-developed materials, certified materials or materials that are not necessarily available in filament form.

Choose the Print Heads for Your 3D Printer

The crown jewel of TUMAKER printers with two independent print heads is the wide range of possible combinations.

Customers have the opportunity to choose the print heads that will be installed on their 3D printer. This is further evidence of the brand’s commitment to meeting each customer’s specific needs.

Get the most out of your printer by combining the print heads that best suit your requirements. Depending on how the product will be used, you can choose from the following configurations:

Dual Bowden–Bowden Print Heads

With two Bowden print heads, you can achieve a greater printing volume in less time and with high precision. As previously mentioned, this combination enhances production with rigid materials.

Dual Direct Drive–Direct Drive Print Heads

With this configuration, experience maximum performance when 3D printing flexible filaments.

Dual Pellet–Pellet Print Heads

Forget about searching for filaments that resemble a specific material. With two Pellet print heads, you can start working with your own injection moulding material, materials developed by yourself and certified materials.

In addition, thanks to the variety of nozzle diameters, you can reduce costs and save time. Now with nozzles of up to 5 mm.

Dual Bowden–Direct Drive Print Heads

Direct Drive and its ability to handle flexible filaments complement the speed and high precision of Bowden. This combination opens up countless possibilities for 3D manufacturing.

Dual Bowden–Pellet Print Heads

The precision and speed offered by the Bowden print head are combined with the wide variety of printing materials available with the Pellet print head. These two print heads make the work much easier and significantly reduce costs.

Dual Direct Drive–Pellet Print Heads

Print with any filament and get the most out of flexible filaments thanks to Direct Drive. In addition, work with other materials in granule form and shorten processes with the Pellet print head. Make the most of each print head and achieve the desired results.

It should be noted that all these combinations are available in any of the four print volumes in the TUMAKER range:

• NX Pro Dual

• BIGFOOT BF 200 Pro Dual

• BIGFOOT BF 350 Pro Dual

• BIGFOOT BF 500 Pro Dual

Ultimately, an endless range of possibilities at your fingertips. Configure your TUMAKER Pro Dual 3D printer to your liking and get the most out of your prints. Fully experience the new range of TUMAKER 3D printers with two independent and combinable print heads.